Benvenuto su VideoMakers.net
Iscriviti per condividere la tua passione sul principale sito web italiano dedicato al VideoMaking!

Gli eventuali inserti pubblicitari all'interno delle discussioni sono visibili solo se non hai eseguito l'accesso al forum; ricordati di eseguire l'accesso o, se non sei ancora registrato, fallo QUI

Clicca qui per leggere le regole del forum
Discussioni su masterizzatori e sulla finalizzazione su supporto ottico in generale.

Moderatore: Moderatori

da Giandido53
#1126952
Ciao volevo sapere se qualcuno può dirmi in questo log dove è l'errore di masterizzazione.
masterizzatore HL DT-ST-BD-RE BH10LS38.
Grazie
Mostra :
Windows Vista 6.1
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100
(Nero Express)
Recorder: <HL-DT-ST BD-RE BH10LS38>Version: 1.03 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <Serial ATA> HA 1
Drive buffer : 4096kB
Bus Type : default
CD-ROM: <HL-DT-ST BD-RE BH10LS38 >Version: 1.03 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <Serial ATA> HA 1

=== Scsi-Device-Map ===

=== CDRom-Device-Map ===
HL-DT-ST BD-RE BH10LS38 D: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4095MB (4194303kB)
Free physical memory: 4095MB (4194303kB)
Memory in use : 10 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.4.2014
Compilation UDF
16:03:08 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

16:03:08 #2 Text 0 File Isodoc.cpp, Line 6789
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

16:03:09 #3 Text 0 File Burncd.cpp, Line 3563
Turn on Disc-At-Once, using Blu-ray Disc media

16:03:09 #4 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorBD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

16:03:10 #5 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 11826175 (2628:02.25, 23097MB)
Last address to be written: 5714335 (1269:51.10, 11160MB)

16:03:10 #6 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD)

16:03:10 #7 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: HL-DT-ST BD-RE BH10LS38, Media type: BD-RE

16:03:10 #8 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================

16:03:10 #9 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 5714016 (5714016) = #5714016/1269:46.66
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 5714016 blocks [D: HL-DT-ST BD-RE BH10LS38]1: TRM_DATA_MODE1 ()
2 indices, index0 (0) not provided
original disc pos #0 + 320 (320) = #320/0:4.20
relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 320 blocks [D: HL-DT-ST BD-RE BH10LS38]
--------------------------------------------------------------

16:03:10 #10 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [D: HL-DT-ST BD-RE BH10LS38] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 2: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 11702304768, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 11702304768 11702304768 11702960128, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 5714016 | 0 | 0x00
5714016 | 2 | 0 | 0x41 | 0 | 0 | 0x00
5714016 | 2 | 1 | 0x41 | 320 | 5714016 | 0x00
5714336 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

16:03:10 #11 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

16:03:10 #12 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

16:03:10 #13 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

16:03:10 #14 Text 0 File Burncd.cpp, Line 4484
Cache writing successful.

16:03:10 #15 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

16:03:10 #16 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 1x (4.495 KB/s)

16:03:10 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

16:03:10 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #11825856

16:03:10 #19 Text 0 File Cdrdrv.cpp, Line 10187
---- Disc Structure (BD): Disc Information on BD (00h) ----
Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
--- Header ---
Disc Information Identifier: <DI>
Disc Information Format: 01 h
Number of DI Units/Aux Frames in each DI block: 2
Number of (recording) layer to which this DI Unit applies: 0
DI unit Sequence Number in DI Block: 0
Continuation flag: Next DI Unit is the start of a new set of parameters (0)
Number of DI bytes in use in this DI unit: 99
--- Body ---
Disc Type Identifier: <BDW>
Disc Size/Class/Version: 2
DI Unit Format dependent contents:
BD Structure: 20 (14 h):
1 recording layer (SL), BD-RE
Hybrid Disc identifier/Channel bit length: 1 (1 h):
no DVD layer present, no CD layer present
channel bit length of 74,5 nm (25.0 GB max. per layer)
Push-Pull polarity flag bits: 00 h
BCA descriptor: BCA-code present (1)
Maximum transfer rate needed by the application: 0 Mbit/s
Data zone allocation:
First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072)
Last Physical ADIP Address of the Data Zone of the related layer (LAA): 00194E7E h (1658494)
Recording velocities:
Nominal Recording Velocity: 4.92 m/s (1EC h)
Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
...
14 01 00 00 01 00 00 00 - 00 00 00 00 00 02 00 00
00 19 4E 7E 01 EC 64 64 - 28 28 28 28 1E 1E 1E 1E
00 00 00 00 58 52 7C 03 - 03 84 84 1C 58 52 7C 03
03 84 84 1C 58 52 7C 03 - 03 84 84 1C 50 50 50 50
00 00 00 00 00 00 00 00 - 00 00 00 00 0F A8 B0 B0
A8 B0 B0 A8 B0 B0 00 00
--- Trailer ---
Disc Manufacturer ID: 53 4F 4E 59 00 00 h <SONY..>
Media Type ID: 45 53 31 <ES1>
Time Stamp [m:y]: 0 : 0000 (00 00 h)
Product Revision Number: 2

16:07:13 #20 SPTI -1169 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B0 04 04 00 80
Buffer x0418acc0: Len x20

16:07:13 #21 SPTI -1169 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0xAD 01 00 00 00 00 00 0A 08 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B0 04 04 00 80
Buffer x07f05800: Len x800

16:07:13 #22 Text 0 File BD.cpp, Line 520
Format BD-RE with Format Type 0h, sub-type 0, spare area size 0 -> return code 0
Allocated spare area size on disc 0
BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
spare area allocation: allocation (1), Stream recording: NO (0); return code -1169

16:07:13 #23 CDR -1169 File ThreadedTransferInterface.cpp, Line 1682
Logical unit not ready, operation in progress
D: HL-DT-ST BD-RE BH10LS38

16:07:13 #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1682
Could not perform start of Disc-at-once

16:07:13 #25 SPTI -1169 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B0 04 04 00 80
Buffer x0415a980: Len x48

16:07:13 #26 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0

16:07:13 #27 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

16:07:13 #28 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 1x (4.495 KB/s)

16:07:13 #29 SPTI -1169 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B0 04 04 00 80

16:07:13 #30 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

16:07:13 #31 SPTI -1169 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B0 04 04 00 80

16:07:13 #32 SPTI -1169 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B0 04 04 00 80

16:07:13 #33 SPTI -1169 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B0 04 04 00 80

16:07:13 #34 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed

16:07:13 #35 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
Ultima modifica di Clicknclips il dom, 06 mar 2016 - 14:57, modificato 1 volta in totale. Motivazione: Impostato bbcode [hide] per non appesantire il topic
da Fearless
#1232642
Ciao, non ho capito un tubo dal file log (prendila a ridere). Ma ti faccio una domanda: la velocità di scrittura a quanto è impostata? Prova a metterla al minimo e riprova. Ovviamente si tratta di software originale no?

Mi sono imbattuto in questo video alla ricerca di […]

Non c'è davvero niente di meglio sul web […]

Nota: non conosco i requisiti del mio pc. quind[…]

Sicuramente ci sarà un metodo più ve[…]