Windows Vista 6.1
AMD64
Wow64Process
WinAspi: -
NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100
(Nero Express)
Recorder: <HL-DT-ST BD-RE BH10LS38>Version: 1.03 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <Serial ATA> HA 1
Drive buffer : 4096kB
Bus Type : default
CD-ROM: <HL-DT-ST BD-RE BH10LS38 >Version: 1.03 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <Serial ATA> HA 1
=== Scsi-Device-Map ===
=== CDRom-Device-Map ===
HL-DT-ST BD-RE BH10LS38 D: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4095MB (4194303kB)
Free physical memory: 4095MB (4194303kB)
Memory in use : 10 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.4.2014
Compilation UDF
16:03:08 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
16:03:08 #2 Text 0 File Isodoc.cpp, Line 6789
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
16:03:09 #3 Text 0 File Burncd.cpp, Line 3563
Turn on Disc-At-Once, using Blu-ray Disc media
16:03:09 #4 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorBD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
16:03:10 #5 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 11826175 (2628:02.25, 23097MB)
Last address to be written: 5714335 (1269:51.10, 11160MB)
16:03:10 #6 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD)
16:03:10 #7 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: HL-DT-ST BD-RE BH10LS38, Media type: BD-RE
16:03:10 #8 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16:03:10 #9 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 5714016 (5714016) = #5714016/1269:46.66
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 5714016 blocks [D: HL-DT-ST BD-RE BH10LS38]1: TRM_DATA_MODE1 ()
2 indices, index0 (0) not provided
original disc pos #0 + 320 (320) = #320/0:4.20
relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 320 blocks [D: HL-DT-ST BD-RE BH10LS38]
--------------------------------------------------------------
16:03:10 #10 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [D: HL-DT-ST BD-RE BH10LS38] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 2: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 11702304768, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 11702304768 11702304768 11702960128, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 5714016 | 0 | 0x00
5714016 | 2 | 0 | 0x41 | 0 | 0 | 0x00
5714016 | 2 | 1 | 0x41 | 320 | 5714016 | 0x00
5714336 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
16:03:10 #11 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
16:03:10 #12 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
16:03:10 #13 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
16:03:10 #14 Text 0 File Burncd.cpp, Line 4484
Cache writing successful.
16:03:10 #15 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
16:03:10 #16 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 1x (4.495 KB/s)
16:03:10 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16:03:10 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #11825856
16:03:10 #19 Text 0 File Cdrdrv.cpp, Line 10187
---- Disc Structure (BD): Disc Information on BD (00h) ----
Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
--- Header ---
Disc Information Identifier: <DI>
Disc Information Format: 01 h
Number of DI Units/Aux Frames in each DI block: 2
Number of (recording) layer to which this DI Unit applies: 0
DI unit Sequence Number in DI Block: 0
Continuation flag: Next DI Unit is the start of a new set of parameters (0)
Number of DI bytes in use in this DI unit: 99
--- Body ---
Disc Type Identifier: <BDW>
Disc Size/Class/Version: 2
DI Unit Format dependent contents:
BD Structure: 20 (14 h):
1 recording layer (SL), BD-RE
Hybrid Disc identifier/Channel bit length: 1 (1 h):
no DVD layer present, no CD layer present
channel bit length of 74,5 nm (25.0 GB max. per layer)
Push-Pull polarity flag bits: 00 h
BCA descriptor: BCA-code present (1)
Maximum transfer rate needed by the application: 0 Mbit/s
Data zone allocation:
First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072)
Last Physical ADIP Address of the Data Zone of the related layer (LAA): 00194E7E h (1658494)
Recording velocities:
Nominal Recording Velocity: 4.92 m/s (1EC h)
Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
...
14 01 00 00 01 00 00 00 - 00 00 00 00 00 02 00 00
00 19 4E 7E 01 EC 64 64 - 28 28 28 28 1E 1E 1E 1E
00 00 00 00 58 52 7C 03 - 03 84 84 1C 58 52 7C 03
03 84 84 1C 58 52 7C 03 - 03 84 84 1C 50 50 50 50
00 00 00 00 00 00 00 00 - 00 00 00 00 0F A8 B0 B0
A8 B0 B0 A8 B0 B0 00 00
--- Trailer ---
Disc Manufacturer ID: 53 4F 4E 59 00 00 h <SONY..>
Media Type ID: 45 53 31 <ES1>
Time Stamp [m:y]: 0 : 0000 (00 00 h)
Product Revision Number: 2
16:07:13 #20 SPTI -1169 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B0 04 04 00 80
Buffer x0418acc0: Len x20
16:07:13 #21 SPTI -1169 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0xAD 01 00 00 00 00 00 0A 08 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B0 04 04 00 80
Buffer x07f05800: Len x800
16:07:13 #22 Text 0 File BD.cpp, Line 520
Format BD-RE with Format Type 0h, sub-type 0, spare area size 0 -> return code 0
Allocated spare area size on disc 0
BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
spare area allocation: allocation (1), Stream recording: NO (0); return code -1169
16:07:13 #23 CDR -1169 File ThreadedTransferInterface.cpp, Line 1682
Logical unit not ready, operation in progress
D: HL-DT-ST BD-RE BH10LS38
16:07:13 #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1682
Could not perform start of Disc-at-once
16:07:13 #25 SPTI -1169 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B0 04 04 00 80
Buffer x0415a980: Len x48
16:07:13 #26 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0
16:07:13 #27 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
16:07:13 #28 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 1x (4.495 KB/s)
16:07:13 #29 SPTI -1169 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B0 04 04 00 80
16:07:13 #30 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
16:07:13 #31 SPTI -1169 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B0 04 04 00 80
16:07:13 #32 SPTI -1169 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B0 04 04 00 80
16:07:13 #33 SPTI -1169 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x04
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 B0 04 04 00 80
16:07:13 #34 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed
16:07:13 #35 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon